Scientific review of Andrea Rossi?s E-Cat ? [REPORT]

[admin]

New test of the E-cat enhances proof of heat. – PDF file.

The accuracy of the measurements during this test must be considered fairly low.
Still, the measurements should lead to the conclusion that this model of the E-cat produced heat at a power of at least 2 to 3 kilowatts in self sustained mode, in this case supposedly with only one of three reactors inside the casing in operation.
As a heat exchanger was used in this set up, steam quality had no importance for the calculation.
The self sustained mode that went on for over three hours, also seemed extremely stable and showed no measurable sign of weakening.
It can also be noted that after three and a half hours of self sustained operation water could still be felt boiling inside, putting a hand on top of the insulated casing. The surface temperature of the insulation was then between 60 and 85 degrees centigrade, meaning that a significant heat loss must have decreased the power output through the steam and the heat exchanger.

On the bad news department, the deal with the US partner is off.



So, today is not the day Mike Giberson has to eat his hat, but that day is fast approaching.





More from the Midas Oracle Group Blog...